Skagit Inboard
Classic Wooldridge lines, and relentless durability!
Exterior Photos
Interior Photos
Rugged and Agile, who says you can't have it all?
The new Wooldridge Skagit model is the latest evolution of quintessential Wooldridge design with its tough looking rugged squared bow, classic Wooldridge lines and relentless durability!
Read More
| 18' Skagit Inboard | |
|---|---|
| Beam | 93'' |
| Length Over All | 20'3'' |
| Bottom Width | 72'' |
| Side Height | 34'' |
| Weight Open | 2,700 |
| Bottom Gauge in Center of Hull | 3/16'' |
| Weight W/ Windshield | 2,775 |
| Fuel Tank | 50Gal |
| Side Gauge | 1/8'' |
| Bottom Gauge | 3/16'' |
| Dead Rise | 10 Degrees |
| Dead Rise In Bow | 14 Degrees |
| 20' Skagit Inboard | |
|---|---|
| Beam | 93'' |
| Length Over All | 22'3'' |
| Bottom Width | 72'' |
| Side Height | 34'' |
| Weight Open | 2,900 |
| Bottom Gauge in Center of Hull | 3/16'' |
| Weight W/ Windshield | 2,975 |
| Fuel Tank | 50Gal |
| Side Gauge | 1/8'' |
| Bottom Gauge | 3/16'' |
| Dead Rise | 10 Degrees |
| Dead Rise In Bow | 14 Degrees |
STANDARD HULL FEATURES
- Limited Lifetime Hull warranty to original buyer
- Fully welded under-floor structure support
- Extended bottom trim plate
- Chevy 5.3 DI
- 214 Hamilton Jet with turbo impeller
- Diamond-plate swim step covering jet on transom
- Aluminum mufflers
- Fresh water cooling with anti-freeze
- Raw water drains
- Hinged aluminum motor cover
- Built-in, under-floor aluminum fuel tank, baffled
- Secondary fuel feed-off tank for kicker fuel
- Meets USCG standards
- Diamond-plate aluminum floors
- Side tray storage areas covered in marine carpet
- Stand-up gunnels with toe kick
- Rod grippers in sides
- Full-width, self-bailing transom shelf
- UV-treated vinyl exterior graphic
- Welded bow and stern eyes
- Welded sport rails
- Walk-around gunnels with non-skid
- Storage under front step deck
- Fuel / Water separator
- 6-panel power source, with sealed switches and fuses
- LED navigation / running lights
- 12V power plug
- Dual USB charger plug
- 1,250 GPH bilge pump
- Electric horn
- Backlit fuel gauge
- Recessed self-bailing bow deck
- Windshield wiper for drivers side
- Welded dash with cable steering system
- Large two-piece, walk-through glass windshield
- Two Navi High-Back upholstered seats for driver and passenger
- Two all-welded aluminum lockable dry storage boxes
- Transducer bracket
Many options available
STANDARD HULL FEATURES
- Limited Lifetime Hull warranty to original buyer
- Fully welded under-floor structure support
- Extended bottom trim plate
- Chevy 5.3 DI
- 214 Hamilton Jet with turbo impeller
- Diamond-plate swim step covering jet on transom
- Aluminum mufflers
- Fresh water cooling with anti-freeze
- Raw water drains
- Hinged aluminum motor cover
- Built-in, under-floor aluminum fuel tank, baffled
- Secondary fuel feed-off tank for kicker fuel
- Meets USCG standards
- Diamond-plate aluminum floors
- Side tray storage areas covered in marine carpet
- Stand-up gunnels with toe kick
- Rod grippers in sides
- UV-treated vinyl exterior graphic
- Welded bow and stern eyes
- Welded sport rails
- Walk-around gunnels with non-skid
- Storage under front step deck
- Fuel / Water separator
- 6-panel power source, with sealed switches and fuses
- LED navigation / running lights
- 12V power plug
- Dual USB charger plug
- 1,250 GPH bilge pump
- Electric horn
- Backlit fuel gauge
- Welded console with cable steering system
- Transducer bracket
Many options available
20' Skagit Inboard with KEM 5.3L V8 VVT DI & Hamilton 212. 620lbs of payload.
| RPM | MPH | GPH | MPG |
|---|---|---|---|
| 2500 | 18.00 | 05.50 | .320 |
| 3000 | 33.00 | 08.60 | 03.80 |
| 3500 | 41.00 | 12.90 | 03.10 |
| 4000 | 47.00 | 18.90 | 02.40 |
| 4170 WOT | 49.00 | 23.60 | 02.00 |