This ocean fishing, dream machine can be yours and is ready for the water. The original owners Larry and Linda are selling their 2011 Custom built 29 foot Wooldridge Pilot House "Pez Gordo!"(all aluminum) with a TRIPLE axle Easy loader trailer with side loading assist bunks.


This boat is loaded up with twin 2011 200 hp Etecs, 2011 9.9 hp yamaha "kicker" with dual helms and electric windlass. Main engine hrs approx 900( 60-70% while trolling at 500-700 rpm, have computer printouts to prove.)

 It will come with "all the goodies!"( 2 electric downriggers, 200 lb pot puller, crab/prawn traps.  Garmin radar, VHF radio,  three Gpsmap 4208 chartplotters(two in front helm, one out back for fishing) which are all integrated together,  dual suspension seats, Wallas cookstove/ heater , extra radar and a Wabasto main heater with thermostat to keep you warm at night.


The boat will be sitting in fresh water this summer for viewing and will allow for us to "take you for a ride' if you are interested.

Yes, this boat has POWER so you have to hang on when the captain hits the throttle!(which I will be more than happy to demonstrate!!)

Location is around Prince George BC Canada.


Reason for selling---"Moving to the Florida" area where our type of fishing/sleeping requirements will change, and "heat" will be a factor!


This boat is made for the rugged, pacific northwest(Alaska, BC Canadian coast) area where rough water, cold, foggy and rainy days are the norm!



Please see list below for original spec sheet for all the details.


For more info please contact 

























Photos from time of delivery to customer





























Manufacturer Work Order 

Wooldridge 29' SS OS Pilot S/N:

Fishing Machine Option (Self Bailing Deck). Two 85 Gallon Fish
Boxes and 150 Gallon Fuel Tank

1 Wabasto Forced Air Diesel Heater with Defrost - Digital Thermostat 
Pilothouse Cabin Package with Extended Cabin and Head. Extra Wide
and 3' Longer with Stand up Head, Full Carpet Package with Trays
Over Cabin Windows Including Wood Trim. See Attached Sheet for
Custom Dinette, No Front Bench. Suspension Seat Swivels Around to
Table and Make Front Third of Bed. Bed Total Length with use of
Swiveling Suspension Seat will be as long as possible. shooting for
6'3" . 

Custom wood finish on dash area, front and side

Gull Wing Door In Cuddy K

1 Custom Cabinet Drawers 

1 Suspension Seats for Driver and Passenger Extends, Counter Top 
1 Swivel for Passenger Suspension Seat 
1 Additional Fan mounted in cuddy 
1 Additional Counter Top Extension to 6" From Rear Wall
Two Power Plugs mounted in rear fishing area near the Downriggers
plugs & one on rear console

2 Two Power Plugs mounted in Cuddy behind dash near light 
Dual Group 27 Deep Cycle Batteries with Switch. Additional Group 27
Starting Battery

Battery Charger, Isolator, ACR, Shore Power, Exterior Shore Power
Plug and Cord, Lighted Switch Panel, DC Sockets in Cabin. 12 Volt
Plugs Included

1 Upgrade Refrigerator to Norcold DE 0788B 

Washdown Pump with Spigot recessed in front of Port side transom
wall. Use Forspar seacock for intake

Anchor Power Winch (Windless) with Rope, Chain. Bruce Type
Bracket and Anchor, spare 30# bruce.anchor

Rear Collapsible Canvas Awning - Move Rocket Launchers Off to
Sides of Roof. Color-Black w/ charcoal boarder

1 Second Hydraulic Steering Station with Welded Console
1 Rear Floodlight for Aft Deck 
Add Two Rocket Launchers on Each Side. Five Total on Each Side of
Cabin. welded solid to roof just inside of roof grab rails, angled back.

1 Bow Pulpit for Heavy Duty Folding Ladder
Large 22" Bow Rails Open at Front Slanting Down to Pulpit. Start
Even with Line of Pilothouse Windshield

1 Heavy Duty Folding Ladder Under Starboard Side of Motor Bracket 
1 Pr Scotty 1106 Electric Downriggers 

Six additional Cleats, 4-total on each side and two on bow cap on either
side of pulpit. Customer will determine location in December

1 Radar Arch at Front of Roof 18" tall at center of roof to top of arch
roof grab rails to be 5-1/2" tall, downposts to lean forward matching
windshield angle 

Rear Sport rails  37" tall off of rear fishing deck w/ wrap around in
each corner approximately 24". downposts to lean forward matching
windshield angle. leave 2' gap from rails to rear of cabin rail.

Garmin System - two 4208's w/ rear station, GMS10, GMR18HD radar,
GSD22, Airmar P66 & SS164 transducers, network system with
isolated switches & connections to VHF200 installed. Spare garmin radar/cables

not installed.

Garmin VHF 200 Radio Mounted Above Helm & networked into
Garmin system. 8' Shakespeare Antenna Mounted on Arch

Two marine speakers installed above helm & install customers supplied
radio w/ satellite antenna & components
cd radio player
Solid Wall Under Dash Separating Cuddy from Main Cabin. Painted
on Cabin Side, Carpet on Cuddy Side

Electric Davit package. 2.3hp HT 601 motor. 2" pipe, 3-piece break
down, sleeved gunnel and base mount. 160 fpm 200+# cap
installed flush in top of flat spot in Starboard side transom

Removable cleaning table with two flush sockets at rear of boat, will
have gutter with hose for draining fish debris. See Grant's drawing.
custom front access storage lockers instead of top side sink and lid.
Two doors in front.

2 Transom grab rails, port and starboard
7 upgrade dome lights to LED day/night dome lights 
1 upgrade red, green and white navigation lights to LED 
install day/night LED reading light in cuddy, port side on 3" tube under

1 Custom aluminum lips in cuddy for removable shelf 
Custom upholstery used throughout cabin for all seats & cushioned
areas. Pattern: Neptune, Color: Ocean

1 Two painted net holders on each side of cabin totaling four
9 welded rear deck tie downs, 4 - standard eyes on each side and one
recessed tie down

1 Free standing seat base w/ Bentley's sportsman seat & swivel
1 install black rubber on top of transom 
Custom built wood cabinet w/ spice rack, paper towel holder & hinged

Custom wood chart holders under trays installed. Four total to hold
four charts

Evinrude E-Tec E200DPXIIE (White)

Evinrude E-Tec E200DCXIIE (White) Counter Rotator S/N:

Rigging Package for Twin Motor Twin Station Fly By Wire,
I-Command Gauge, Fuel Economy Kit, GPS an Memory Module, Dual
Engine Oil Level Converter Kit.

2 Extension Harness 
2 SS prop 16 inch vipers
1 Stainless Steel Tiebar for Dual Engines
Yamaha T9.9GPLR (High Thrust) Kicker S/N:

1 Rigging Package for Remote Kicker 
1 Installation and Testing of Kicker 
1 Stainless Steel Tiebar 
1 Install customers controll king for kicker motor 
EZ Loader triple axle Aluminum Trailer 
Electric brake package 

1 Slick Bunk on Bunks 
1 Spare Tire & Wheel with Heavy Duty Spare Carrier 



**********Additional mods and equipment included.(TBA)***************